Welcome Welcome Welcome Welcome Welcome
Welcome Welcome Welcome Welcome Welcome
    
Advanced Search  

  
Friday, November 24th, 2017  
  
 
What's New
Promotions
 
Feedback
Mailing List
Polling

Conductivity Meter

The HI-933000 is a portable conductivity meter that measures conductivity from 0.1µS to 200 mS with just one probe! The 4 stainless steel potentiometeric rings are concentrically positioned on the probe shaft with the last one housing the temperature sensor. All readings are compensated automatically for any ... more

 Ductless Fume Hood ESCO
Home : Our Principals : ESCO : Ductless Fume Hood ESCO

Esco Streamline® Ductless Fume Cabinet

Today, the Esco Streamline® Ductless Fume Cabinet is probably the most advanced in the world, from a design and engineering point of view, of any low-cost ductless fume cabinet. Now users can enjoy, at an economical cost, the benefits of features previously found only on high-end ductless fume cabinets - including sophisticated electronic airflow alarms, a unique filter mounting system that eliminates bypass leaks inherent in conventional clamping systems, a generously-sized main filter with higher chemical retention capacities.

Unlike similar products offered by the competition, our blower system is also over-sized to deliver higher airflow volumes, at lower operating points. With the blower system running at less than maximum capacity, longer operating lifetimes and lower noise levels are achieved. The motorised impeller design of our blower system also ensures better airflow uniformity and distribution within the cabinet for better operator protection. Another key advantage of these models is their low energy consumption, due to Esco’s employment of exclusive external rotor technologies.

  • Unique modular design eliminates the need for local assembly while reducing shipping costs; convenient maintenance features include a filter design which allows replacement in minutes and quick-snap wire connectors for easy setup
  • Industrial-grade main body constructed of electrogalvanised steel : with an abrasion-resistant white oven-baked powder-coated finish
  • All components designed for maximum chemical resistance for long service life and durability
  • 10-degree sloped front and large 200mm / 7.9" access opening allows easy access to work zone - enhancing ergonomics, eliminating operator fatigue and increasing productivity
  • Permanently lubricated direct drive centrifugal blower(s); energy efficient external rotor motor type design reduces operating costs; extremely low noise and vibration levels (less than 53dBA at working position) due to proprietary construction and mounting technology
  • Built-in solid state variable speed controller(s) (infinitely adjustable from zero to the maximum setting) with built-in RFI and noise filters is superior to conventional "step" controllers
  • Standard cabinet control system consists of separate switches / indicator lights for blower, lights; built-in electronic audible / visual alarms for airflow and front window position deliver enhanced operator safety
  • Integral Fluorescent lighting is mounted out of the air stream for better airflow uniformity; in addition, the aerodynamic design of the enclosure ensures maximum containment possible
  • High-quality prefilter (replaceable from within work zone) and activated carbon filter (7 different filter types available depending on the requirements of your application)
  • Industry-exclusive AutoPurge™ air exhaust slots at the backwall for enhanced operator safety
  • Transparent perspex front window and sides provide a high degree of visibility and operator comfort; front window is mounted on self-supporting pre-tensioned hinges, allowing for easy access during cabinet loading and startup
  • Built-in passthrough flaps (2ft model - 1 flap; 3ft and 4ft models - 2 flaps) at back of work zone for electrical, gas, nitrogen, vacuum etc. services
  • Designed to meet the general safety requirements of the IEC 61010-1 / EN 61010-1 / UL 3101-1 / CSA C22.2 No. 1010.1-92
  • Cabinet is shipped fully-assembled; simply plug the unit into a power source for operation - no local installation is required; unit is supplied with a 3-pin plug; 10 plug types are available (specify order code when ordering)

Technical Data

General Specifications

SDC-2AX SDC-3AX SDC-4AX
External Dimensions
(Width x Depth x Height)
730 x 640 x 1090 mm
28.7" x 25.2" x 50.0"
1035 x 640 x 1090 mm
40.7" x 25.2" x 50.0"
1340 x 640 x 1090 mm
50.4" x 25.2" x 50.0"
Internal Work Zone
(Width x Depth x Height)
650 x 610 x 715 mm
25.6" x 24.0" x 28.1"
955 x 610 x 715 mm
37.6" x 24.0" x 28.1"
1260 x 640 x 715 mm

49.6" x 24.0" x 28.1"
Air Volume (At Initial Velocity) 234 cmh / 138 cfm 344 cmh / 202 cfm 454 cmh / 267 cfm
Inflow Velocity Initial setpoint : average of 0.5 m/s or 100 fpm measured in plane of work aperture
Standard Filtration Elements Main filter: Activated carbon with 50mm / 2" granular media bed (7 different filter types available)
Pre-filter: Washable non-woven polyester fibers with an efficiency of 20% against gross particulate matter

Noise Level

61 dBA at initial blower speed setting measured at typical operator work position

Light Intensity >800 lux / >75 foot candles at work surface level
Construction
  • Enclosure frame: Mild steel hollow sections with whiteoven-baked epoxy powder-coated finish
  • Blower and filter module: Electro-galvanised steel with whiteoven-baked epoxy powder-coated finish
  • Back panel: Electro-galvanised steel with white oven-baked epoxy powder-coated finish
  • Front and sides: 5mm / 0.2" transparent perspex
Power Supply Choose from the following power supply configuration codes when ordering (e.g. RHL-2A3, for 220-240VAC 60Hz)
1: 220-240VAC 50HZ 2: 110-130VAC 60HZ 3: 220-240VAC 60HZ 4: 110-130VAC 50HZ 5: 100-110VAC 50HZ/60HZ
Power Rating 185W (230VAC units)
230W (115VAC units)
225W (230VAC units)
270W (115VAC units)
225W (230VAC units)
270W (115VAC units)
Net Weight 70 kg / 154 lbs 84 kgs / 185 lbs 100 kg / 220 lbs
Max Shipping Weight 142 kg / 313 lbs 192 kgs / 427 lbs 242 kg / 534 lbs
Shipping Dimensions 870 x 1000 x 980 mm
(35.4" x 38.2" x 54.7")
1200 x 1000 x 980 mm
(47.2" x 38.2" 54.7")
1480 x 1000 x 980 mm
(59.1" x 38.2" x 54.7")
Shipping Volume 0.85 cbm / 30 cbf 1.18 cbm / 41.7 cbf 1.45 cbm / 51.2 cbf
 Printable Version (View: 2746 | Print: 619)

Next:
ESCO Airstream® Ductless Fume Cabinet

Previous:
Fume Filtration

Biotechnology Equipment ESCO
Cleanroom Equipment
Ductless Fume Hood ESCO
Fume Hood ESCO
 
PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999
 
Home  |  About Us  |  Products  |  Download  |  Support  |  Contact Us
 
   Back to top