Welcome Welcome Welcome Welcome Welcome
Welcome Welcome Welcome Welcome Welcome
    
Advanced Search  

  
Friday, June 22nd, 2018  
  
 
What's New
Promotions
 
Feedback
Mailing List
Polling

Spray Monitors

Self-Adhering Hiding Power Labels These are pressure sensitive labels with a hiding power test pattern and a sealed, solvent-resistant surface. They are used primarily with metal panels on which the uniform surface provides no visual clue as to the thickness of an applied paint film. When placed on such a ... more

 Autoclave TOMY
Home : Our Principals : TOMY DIGITAL BIOLOGY : Autoclave TOMY

Autoclave SX series

Speedy Autoclaves

Maximized chamber capacity at Minimum installation space

Easy operation using the "Top-open lid"

A top-open lid, which can be operated easily with a single hand or foot, is provided with the SX autoclaves. To open the lid, the lid lock is released by stepping on the foot pedal locates at the bottom while pressing the lid down. The lid can be opened with minimal effort owing to mechanical assistance. In addition, the lid can be closed easily just by pressing it down.

Saving the installation space

The main body is very compact owing to the design which provides thorough installation space saving. In addition, installation space at the side of the main body which is required for models employing a slide-open lid, which is not necessary at SX autoclaves top-open lid. Even when several SX autoclaves are installed side-by-side, the necessary installation space is minimized.

A : 790mm(SX-300),970mm(SX-500),1003mm(SX-700)
B : 614mm(SX-300),794mm(SX-500),827mm(SX-700)
C : 410mm(SX-300/500),470mm(SX-700)

Easily viewable "work monitor"

The LED display shows working status for easy monitoring. The process being performed is indicated by an LED indication lamp blinking in red.

The illuminated display on the operating panel shown in the picture is different from the actual display at the time of operation.

Cooling fan provided as a standard feature

A rapid air-cooling function (vessel-cooling fan) permitting reduction of chamber cool down time is provided as a standard feature. This is most appropriate for lowering the temperature rapidly on completion of the cycle. The time required for lower the temperature is much reduced by employment of the cooling fan in comparison with natural cooling.

Sterilizing course selection

The optimal sterilizing course can be selected from among five courses, such as the liquid sterilizing course in addition to that for normal sterilization.

Other features

Large indication lamp "Operated"

An easily viewable large indication "Operated" is provided at the upper section of the operating panel.
Depending on the pressure status (normal pressure/pressure is applied),the displayed color changes.

Setting to 100C is possible.

Variable temperature setting such as to 100C as well as to 121C has been made possible.The temperature can be set within the range from 45C to 135C in steps of one degree (heating mode up to 104C).

Auto-variable exhaust speed

A function allowing the exhaust valve to open automatically after completion of sterilization is provided. The exhaust speed can be set to one of six levels (set to variable for liquid sterilization

Timer function

The operation starting time can be preset easily. By presetting the start of operation, otherwise wasted periods at night or early morning, can be used effectively.

Setting to 100C is possible.

Variable temperature setting such as to 100C as well as to 121C has been made possible.The temperature can be set within the range from 45C to 135C in steps of one degree (heating mode up to 104C).

Lid interlock

A safety device (lid interlock mechanism) for locking the lid during operation is provided. A high level of safety is assured to prevent unanticipated accidents.

Pressure fine adjustment function

When the balance between the temperature and pressure deviates during sterilization, fine exhausting is carried out automatically in order to adjust the best chamber condition.

Functions & Features
Liquid sterilizing / Heating / Warming / Check / Last-run memory / Built-in steam exhaust bottle
Flat internal surface of the chamber / Lid opening/closing detection mechanism
Exhaust bottle detection mechanism / Leakage breaker provided

OPTION

External sensor for the articles to be sterilized

Sensor for directly detecting the temperature of articles to be sterilized. More reliable sterilization monitor can be carried out.

Data output

The temperature data, pressure data, etc. can be exported. The temperature can be recorded when the external recorder is connected.

External sensor and recorder

A temperature sensor and recorder independent of the autoclaves. The chamber temperature can be recorded.

SX Specifications

Model name

SX-300

SX-500

SX-700

Operating temperature range

Sterilizing

105 ∼ 135C0.019 ∼ 0.212MPa

Heating

45 ∼ 104C0 ∼ 0.015MPa

Warming

45 ∼ 95C

Maximum operating pressure

0.263MPa

0.25MPa

Temperature

Display

Digital

Pressure gauge

Display

Analog

Display range

0 ∼ 0.4MPa

Heat source

1.5kW electric heater

2kW electric heater

3kW electric heater

Safety device

Water level sensor, Current leakage breaker, Lid interlock, Over-heat prevention, Over-pressure prevention, Open temperature sensor detection, Safety valve

Time

Display

Digital

Display
range

Sterilizing

0:00 - 9:59, 0 - 99hours, 0 - 999min.(0:00 - 9:59,10 - 99hours changeable)

Heating

Warming

Variable: 0 - 99hours

Chamber dimensions

φ325 x 553mm

φ325 x 733mm

φ370 x 774mm

Chamber capacity

Effective internal
volume:36L,
Internal volume:44L

Effective internal
volume:50L,
Internal volume:58L

Effective internal
volume:69L,
Internal volume:79L

Chamber material

SUS304

Dimensions (mm)

410W x 477D x 790Hmm
(With protruding:574D)

410W x 477D x 970Hmm
(With protruding:574D)

470W x 528D x 1003Hmm
(With protruding:625D)

Weight

50kg

60kg

72kg

Rated voltage

120V AC

-

230V AC

Power input

13A/120V

17A/120V

-

7A/230V

9A/230V

13A/230V

Required power supply

Single-phase 120V AC
(50/60 Hz)15A or more

Single-phase 120V AC
(50/60 Hz)20A or more

-

Single-phase 230V AC
(50/60 Hz)10A or more

Single-phase 230V AC
(50/60 Hz)15A or more

Single-phase 230V AC
(50/60 Hz)15 A or more

Power consumption (calorific value)

1.5kW (1290kcal/h)

2.0kW (1720cal/h)

3.0kW (2580cal/h)

Environmental Conditions

When opereting the autoclave, observe the environmental conditions given below.
Ambient temperature: 10 to 35C
Almospheric pressure: 860 to 1060hPa
Relative humidity: 30 to 85%
Maximum gradient: 2

Accessories

Stainless baskets 1
(φ300 x 182mm)

Stainless baskets 2
(φ300 x 182mm)

Stainless baskets 2
(φ345 x 181mm)

Chanber bottom Plate 1, Caster stoppers 4, Operator's Manual 1, Clear folder (for storing the operation manual) 1, Screw (for attaching the clear folder) 1, Warranty card 1, Customer card 1, Inspection Sheet 1

SX-E Specifications

Model name

SX-300E

SX-500E

SX-700E

Operating temperature range

Sterilizing

105 ∼ 135C (0.019 ∼ 0.212MPa)

Heating

45 ∼ 104C (0 ∼ 0.015MPa)

Warming

45 ∼ 95C

Maximum operating pressure

0.263MPa

0.25MPa

Temperature

Display

Digital

Pressure gauge

Display

Analog

Display range

0 - 0.4MPa

Heat source

1.5kW electric heater

2.0kW electric heater

3.0kW electric heater

Safety device

Water level sensor, Leakage breaker, Lid interlock, Over-heat prevention, Over-pressure prevention, Temperature sensor break detection, Safety valve

Protection type against electrical shock

Class I equipment

Time

Display

Digital

Display
range

Sterilizing

0:00 - 9:59, 0 - 99hours, 0 - 999min.(0:00 - 9:59,10 - 99hours changeable)

Heating

Warming

Variable: 0 - 99hours

Pressure chamber type

PED Category II

Chamber dimensions

φ325 x 553mm

φ325 x 733mm

φ370 x 774mm

Chamber capacity

Effective internal
volume:36L,
Internal volume:44L

Effective internal
volume:50L,
Internal volume:58L

Effective internal
volume:69L,
Internal volume:79L

Chamber material

SUS304

Dimensions (mm)

410W x 477D x 790Hmm
(With projection:574D)

410W x 477D x 970Hmm
(With projection:574D)

470W x 528D x 1003Hmm
(With projection:625D)

Weight

50kg

60kg

72kg

Rated voltage

230V AC

Power input

7A

9A

13A

Required power supply

Single-phase 230V AC
(50/60 Hz)10 A or more

Single-phase 230V AC
(50/60 Hz)15 A or more

Single-phase 230V AC
(50/60 Hz)15 A or more

Power consumption (calorific value)

1.5kW(1290kcal/h)

2.0kW(1720kcal/h)

3.0kW(2580kcal/h)

Environmental Conditions

When opereting the autoclave, observe the environmental conditions given below.
Ambient temperature: 10 to 35C
Almospheric pressure: 860 to 1060hPa
Relative humidity: 30 to 85%
Maximum gradient: 2

Accessories

Stainless baskets 1
(φ300182 mm)

Stainless baskets 2
(φ300182 mm)

Stainless baskets 2
(φ345181 mm)

Caster stopper 4, Chamber bottom Plate 1, Operator's Manual 1, Clear Plastic Accessory Case 1, Attachment Screw for Clear Plastic Accessory Case 1, Inspection Sheet 1, Warranty card 1, Customer card 1

*Please refer to theEC Declaration of Conformityfor detailed standard application.

* Specifications and design are subject to change for improvement without prior notice. Please ask for the latest specifications prior to your order and procurement.

Download PDF Brochure

 Printable Version (View: 3922 | Print: 839)

Next:
Autoclave ES series

Previous:
Autoclave SDL-320 with dryer

Autoclave TOMY
TOMY Centrifuges
 
PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999
 
Home  |  About Us  |  Products  |  Download  |  Support  |  Contact Us
 
   Back to top