Welcome Welcome Welcome Welcome Welcome
Welcome Welcome Welcome Welcome Welcome
    
Advanced Search  

  
Friday, July 20th, 2018  
  
 
What's New
Promotions
 
Feedback
Mailing List
Polling

Fume Filtration

Conventional ducted fume hoods provide safety to laboratory personnel by drawing air across a front opening in the hood at a controlled rate, thus preventing any toxic vapours generated during the experimental procedure from escaping into the general laboratory environment. Air is then exhausted via a fan system to the ... more

 Water Sampler
Home : Our Principals : GLOBAL WATER : Water Sampler

SP200 PERISTALTIC SAMPLING PUMP

Variable Speed Portable Peristaltic Pump Sampler

FEATURES:

  • Easy interface with speed control for exact sample size with no spilling
  • Reversible motor to backflush sampling hose
  • Sample at any speed up to 500 mL per minute rate at 4 foot head
  • Weather resistant enclosure
  • 15' pickup hose with strainer provided

Peristaltic Sampling Pump Product Description
Global Water's SP200 variable speed portable peristaltic pump sampler is ideal for removing samples from shallow wells and surface water, including lakes, ponds, and holding pools.  The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance.  The manually-operated peristaltic pump can backflush the sample hose after a sample has been taken.

Power
The SP200 Peristaltic Sampling Pump requires an external 12 volt DC power source that can supply at least 2 A continuous.  The variable speed motor is reversible and can sample at any speed up to 500 mL per minute.

A power cord (10 ft/3.05 m) is included with the unit.  The power cord is fitted with alligator clips for easy connection to almost any 12 volt DC battery, such as a car battery or a small 12V, 5 AH gel cell battery.

Sampling
To provide high sample integrity, the SP200 does not allow water samples to contact any peristaltic pump components other than the norprene and polyethylene tubing.  This tubing is easily cleaned or replaced.  To avoid cross contamination or lengthy decontamination procedures, simply change the inexpensive tubing between samples.

Peristaltic Sampling Pump Specifications

Enclosure:  Expanded UV protected PVC (9" x 7.5" x 4.5")
Weight:  4.5lb (Shipping Weight 6lb)
Operating Temperature:  0-70°C
Operating Voltage:  12V DC
Current Draw:  2A max

Sample Pump
Flow Rate:  Variable Analog, up to 500 ml per minute at 4 ft. head
Backflush Rate:  Same as Flow Rate
Type:  Peristaltic
Maximum Lift:  22'
Pump Tube:  Norprene 1/4" ID
Sample Hose:  15' nylon reinforced 1/4" ID polyethylene flexible tubing section with intake strainer.  Hose may be extended, as required, using standard 1/4" tubing and fittings.

Peristaltic Sampling Pump Options

SP200 Peristaltic Sampling Pump
REPLACEMENT PARTS
00-010   12V 5AH Rechargable Battery
FE0400 Battery Charger (120VAC to 12VDC)
00-546   Pickup Hose
CA0600 Pickup Strainer
00-744   Peristaltic Pump Tubing
 Printable Version (View: 3088 | Print: 599)

Next:
WS750 WASTEWATER/STORMWATER SAMPLER
WS700R REFRIGERATED WASTEWATER SAMPLER
FSS FLOW SAMPLING SYSTEM
WQS WATER QUALITY SAMPLING SYSTEM
SP100 WATER SAMPLER

Previous:
SP250 QUICK RELEASE WATER SAMPLER
GP SUBMERSIBLE GROUNDWATER PUMPS Ground water pump for water testing
GP INLINE WATER PUMPS
WP GROUNDWATER PURGING PUMPS
LONG HANDLED DIPPERS

Control
Remote Monitoring
Water Flow
Water Level
WATER QUALITY
Water Sampler
Weather
 
PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999
 
Home  |  About Us  |  Products  |  Download  |  Support  |  Contact Us
 
   Back to top