Welcome Welcome Welcome Welcome Welcome
Welcome Welcome Welcome Welcome Welcome
    
Advanced Search  

  
Wednesday, November 20th, 2019  
  
 
What's New
Promotions
 
Feedback
Mailing List
Polling
 WATER QUALITY
Home : Our Principals : GLOBAL WATER : WATER QUALITY

WQ750 TURBIDITY SENSOR

Self cleaning turbidity sensors with analog output

FEATURES:

  • Reliable concentration measurement using optical measuring process
  • Signal preprocessing in sensor
  • Rugged stainless steel sensor body
  • Temperature and ambient light compensation
  • Quartz Glass
  • Built in wiper to keep sensing surfaces clean
  • Isolated 4-20mA output

Turbidity Sensors Product Description

Turbidity Sensor Measuring principle
Low turbidity is measured by scattered light. The number of suspended particles corresponds to the intensity of scattered light. In order to ensure that different measuring instruments will yield comparable results, the standard ISO 7027 (DIN 38404) was drawn up, stipulating 90 measurement for turbidity (FNU).

Turbidity Sensor Design
The turbidity sensors process an analog signal 420 mA which is supplied by the turbidity sensor's electronics after compensation of temperature and ambient light. A mechanical wiper prevents contamination of the turbidity sensor's measuring windows. The wiper cycle is controlled by an extern contact and allows you to match the turbidity sensor's cleaning cycle to your application. Preprocessing the turbidity sensor's measurement signal directly in the probe allows the turbidity probe and analyser to be extended by up to 656 feet (100m). The heavy duty WQ750, turbidity sensors are constructed of 316 stainless steel with scratch resistant quartz optical lenses to provide a long, dependable service life. The turbidity sensors will even work in seawater with no issues. The turbidity sensors ships complete with 42 feet of cable and wiper actuation board.

Turbidity Sensor Installation
Reflections from stationary installations in the area of the turbidity sensor (e.g. wall, ground) can affect turbidity measurements at low turbidity levels, causing the turbidity sensor to give false high turbidity values. It is important to take account of this when performing turbidity sensor control measurements in small vessels. The distance between the turbidity sensor probe and the next wall should be large enough to avoid reflections, see the diagram below.

Turbidity Sensors Applications

  • Filtration monitoring
  • Condensate monitoring
  • Industrial water monitoring
  • Final effluent of wastewater treatment plants
  • Industrial quality control
  • and MUCH MORE...

Turbidity Sensors Specifications

Measuring principle: 90-scattered light with pulsed infrared light, according to ISO 7027 (DIN 38404)
Wavelength: 880 nm
Measuring range: 1-1000 FNU
Maximum error: < 1% of measuring range
Repeatablility: <1%
Analog output: 4-20 mA Isolated
Signal filter: 10 sec.
Control signal for wiper: pulse duration 5 sec. / O V

Electrical:
Power: 1024 VDC
Sensor current: ~220mA @ 12 VDC
Wiper current: 50 mA

Operating conditions
Temperature range: 0-50 C (32-122 F)
Operating pressure max.: 6 bar (87 psi) maximum

Materials
Sensor body: Stainless steel 1.4571 (SS 316 Ti)
Wiper: Rubber
Optical windows: Quartz glass
Cable: 22 AWG 7 conductor with aluminum foil/tinned copper wire shield
Cable length: 42.5 ft (15m) Size: 1 1/2in D x 5.75in L (38mm D x 146mm L)
Weight: 2 lbs.

Turbidity Sensors Options

WQ750 Self Cleaning Turbidity Sensor
42' standard cable length.
 Printable Version (View: 2786 | Print: 688)

Next:
WQMS WATER QUALITY MONITORING SYSTEM
WQ201 pH SENSORS
WQ301 CONDUCTIVITY SENSORS
WQ401 DISSOLVED OXYGEN SENSORS
WQ600 ORP SENSORS

Control
Remote Monitoring
Water Flow
Water Level
WATER QUALITY
Water Sampler
Weather
 
PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999
 
Home  |  About Us  |  Products  |  Download  |  Support  |  Contact Us
 
   Back to top