LX-130 / LX-140 & LIX-130
The LX Series Low-Speed Centrifuges offer new accessory options and
engineering innovations designed to support a wider range of applications.
Featured in this line is the LIX-130 Low-Speed Dual-Temp Centrifuge with both
cooling and heating functions. It maintains chamber temperatures between
-9degree Celsius and 42degree Celsius within 2degree Celsius of the set
temperature allowing use for applications such as "Centrifugal enhancement
of retroviral-mediated gene transfer".
|1,160ml(290ml X 4)
||2,000ml(500ml X 4)
Tomy offers a wide selection of Easy-Mount Rotors for the LX/LIX
Centrifuges. These rotors install and remove with the turn of a knob and the
selection covers most of the commonly used centrifuge labware.
The Flex-Spin Drive features a flexible motor shaft that equalizes minor
imbalances without damaging the centrifuge or triggering the imbalance
protection system. This allows excellent tolerance for minor differences in
Superior Imbalance Protection
Tomy has developed a unique concept in imbalance protection based on the kinetic
energy generated by the entire rotational system including the motor, rotor,
buckets and adapters. This system, with its expanded inputs, is capable of
detecting a severe imbalance within a few seconds after the centrifuge is
High-Speed Fixed Angle Rotor
The TLA-11 Fixed Angle Rotor is a high-speed rotor that takes up to six 35 to 50
ml conical centrifuge tubes, and generates up to 9,600G. With the CA1500-01
adapters, this rotor will also take up to twelve 15 ml conical tubes. The
maximum speeds will depend on the tube manufacturers' specifications.
Higher Speeds for Microplates
The TS-38LB rotor and B438-96 buckets spin four 96-well microplates at 4,200 rpm
generating 3,100G - sufficient for microplate based ethanol extractions of DNA.
Precise RPM/g Force Conversions
The BART Code System offers greater precision for g-force calculations
because it assigns a unique code based on each Bucket, Adapter, Rotor and Tube
combination. Converted values are displayed at the touch of a button and the
centrifuge can be set to spin at either a specific rpm or G-force value.
Induction Drive Motor
The LX Series centrifuges feature a brushless, induction drive motor that is
extremely quiet and maintenance-free.
Compact and Convenient
The LX Centrifuges do not require a rear-gap for proper ventilation so they can
be installed directly against the wall. Access to the chamber is at a
comfortable 72 cm from the floor making easy to see and reach into the chamber.