Welcome Welcome Welcome Welcome Welcome
Welcome Welcome Welcome Welcome Welcome
    
Advanced Search  

  
Thursday, March 21st, 2019  
  
 
What's New
Promotions
 
Feedback
Mailing List
Polling

Retsch Test Sieves

The particle size analysis is constantly confronted with ever increasing demands. This is also reflected in the greater requirements made in the new standard DIN ISO 3310. In order to adapt our new Retsch Test Sieves to these new requirements, Retsch has developed a completly new manufacturing process that guarantees a ... more

 Tinius Olsen Bench Machines
Home : Our Principals : TINIUS OLSEN : Tinius Olsen Bench Machines

Dual Colums : Features & Technical Specifications

for H10K / H25K / H50K

Key Features

  • PC control via high speed RS232 using ASCII and super high speed binary modes

  • Force accuracy of 0.5% of applied load across the load cell display range

  • 32 bit precision motor controller

  • Displacement resolution of 0.0001 mm (T series in binary mode)

  • Speed resolution of 0.001 mm/min

  • 150% mechanical overload on load cells

  • 20% digital load tare while maintaining full load cell capacity

  • Automatic motor alarms monitor over/ under voltage, current and temperature

  • Built-in intelligent active force and displacement alarm system

Technical Specifications

MODEL   H10K H25K H50K
CAPACITY lbf 2000 5000 10,000
kN 10 25 50
kg 1000 2500 5000
CLEARANCE BETWEEN COLUMNS in 16 16 16
mm 405 405 405 
LOAD CELLS  

Rapid change, low profile Z type, load cells with digital encoding for automatic recognition and scaling available 10kN, 5kN, 2.5kN, 1kN, 500N, 250N, 100N, 50N, 10N, 5N

Rapid change, low profile Z type, load cells with digital encoding for automatic recognition and scaling available 25kN, 10kN, 5kN, 2.5kN, 1kN, 500N, 250N, 100N, 50N, 10N, 5N

Rapid change, low profile Z type, load cells with digital encoding for automatic recognition and scaling available 50kN, 25kN, 10kN, 5kN, 2.5kN, 1kN, 500N, 250N, 100N, 50N, 10N, 5N

MAXIMUM CROSSHEAD TRAVEL  

Measurement direct from ballscrew fully auto scaling of single measurement range

in 43  43 43
mm 1100 1100 1100

TESTING SPEED RANGE

in/min 0.001 to 40 0.001 to 40 0.001 to 20
mm/min 0.001 to 1000 0.001 to 1000 0.001 to 500

CAPACITY AT MAXIMUM SPEED

lbf 1000 2000 5000
kN 5 10 25

MAXIMUM SPEED AT CAPACITY

in/min 20 20 10
mm/min 500 500 250
JOG SPEED in/min 0.001 to 40 0.001 to 40 0.001 to 20
mm/min 0.001 to 1000 0.001 to 1000 0.001 to 500
RETURN SPEED in/min 0.001 to 30 0.001 to 30 0.001 to 30
mm/min 0.001 to 750 0.001 to 750 0.001 to 750

DIMENSIONS H x W x D

in 63 x 26 x 18 63 x 26 x 18 64 x 29 x 20
mm 1600 x 650 x 450 1600 x 650 x 450 1613 x 720 x 500

WEIGHT

lb 255 265 310
kg 115 120 140

Specifications:

Load measurement accuracy :

+/- 0.5% of indicated load from 2% to 100% capacity; extended range down to 1% capacity with accuracy of 1% of indicated load

Position measurement accuracy : +/- 0.01% of reading or 0.001 mm, whichever is greater
Speed accuracy : +/- 0.005% of set speed
Operating temperature range : 32 to 100 degrees F (0 to 38 degrees C)
Storage temperature range : 14 to 115 degrees F (-10 to 45 degrees C)
Humidity range : 10% to 90% non-condensing, web bulb method
Power :

standard optional voltages 220/240VAC, 50-60 Hz, 2000W; power must be free of spikes and surges exceeding 10% of the nominal voltage

 Printable Version (View: 2042 | Print: 696)

Next:
Low Cost Benchtop Material Testing ; Features & Technical Specification

Previous:
Single Colums Models : Features & Technical Specification

Tinius Olsen Air Brinell
Tinius Olsen Bench Machines
Tinius Olsen Heat Distortion
Tinius Olsen High Force
Tinius Olsen Hydraulic
Tinius Olsen Impact System
Tinius Olsen Melt Indexer
Tinius Olsen Software
Tinius Olsen Torsion
 
PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999
 
Home  |  About Us  |  Products  |  Download  |  Support  |  Contact Us
 
   Back to top