Welcome Welcome Welcome Welcome Welcome
Welcome Welcome Welcome Welcome Welcome
    
Advanced Search  

  
Saturday, April 21st, 2018  
  
 
What's New
Promotions
 
Feedback
Mailing List
Polling

Abbe Refractometer NAR-1T LIQUID

This is the Abbe Rerfactometer for liquid sample measurement only. It has the Refractive Index Scale and the BRIX scale, and it comes with D line (589nm) light source. Calibration can be done with distilled water. Model NAR-1T ... more

 Tinius Olsen High Force
Home : Our Principals : TINIUS OLSEN : Tinius Olsen High Force

Electomatic IV Series

150kN, 300kN, 600kN, 1000kN, & 1500kN Electomatic UTM

Unlike conventional testing machines that provide maximum weighing and indicating accuracy only when loads are centrally applied, the Electomatic IV series provides exceptional accuracy even with eccentric loading. One of the keys to its unique off-center loading is Tinius Olsen’s exclusive QuadraSensor weighing system. It incorporates four Olsen strain gage force columns —one at each corner of the load frame table — whose combined signals produce an extremely accurate indication of the load being applied to the specimen. Electomatic IV machines will accurately indicate off-center loads applied within the loading area of the screws and rated capacity of the bearing points at the four corners of the weighing table.

These rugged electromechanical test machines are available in two screw or four screw load frame designs. As standard, all new Electomatic IV machines include a four quadrant motor drive for closed-loop control and can be linked with Tinius Olsen’s Windows-based Test Navigator software for complete data acquisition, data analysis and sophisticated machine control from a pc.

Common Specifications:

Load measurement accuracy : +/- 0.5% of indicated load from 0.2% to 100% capacity
Position measurement accuracy : +/- 0.1% of reading
Speed accuracy : +/- 0.1% of set speed
Operating temperature range : 50 to 100 degrees F (10 to 40 degrees C)
Power : Power must be free of spikes and surges exceeding 10% of the nominal voltage
Humidity range :

10% to 90% non-condensing tee slotted table.

Technical Specifications :

MODEL

  30 60 120 200 300
Capacity lbf 30,000 60,000 120,000 200,000 300,000
kN 150 300 600 1000 1500
kg 15,000 30,000 60,000 100,000 150,000

No. of Loading Screws

  2 4 4 4 4

Cleareancce Between Columns

in 20 30 30 30 30
mm 520 780 780 775 775

Max. Tension Specimen Length

in 48 48 48 48 72
mm 1220 1220 1220 1220 1830

Max. Compression  Height

in 48 48 48 52 76
mm 1220 1220 1220 1320 1930

Testing Speed Range

in/min 0.002 to 20 0.002 to 20 0.002 to 10 0.002 to 10 0.002 to 10
mm/min 0.05 to 500 0.05 to 500 0.05 to 250 0.05 to 250 0.05 to 250

Dimensions (W x D x H)

in 101 x 41 x 93 113 x 45 x 100 115 x 54 x 107 114 x 64 x 116 117 x 106 x 142
mm 2565 x 1040 x 2360 2870 x 1145 x 2540 2920 x 1370 x 2720 2895 x 1625 x 2495 2970 x 2690 x 3605
Weight lb 3600 8000 12,000 17,000 22,000
Kg 1635 3630 5440 7710 9975

Download PDF brochure : Click Here

 Printable Version (View: 1955 | Print: 719)

Next:
Model H100KS
Model H100KT
LoCap Series

Previous:
Software

Tinius Olsen Air Brinell
Tinius Olsen Bench Machines
Tinius Olsen Heat Distortion
Tinius Olsen High Force
Tinius Olsen Hydraulic
Tinius Olsen Impact System
Tinius Olsen Melt Indexer
Tinius Olsen Software
Tinius Olsen Torsion
 
PT. PROLABMAS MURNI SWADAYA
Sentra Niaga Puri Indah Blok T3-10
Jakarta 11610 - Indonesia
Telp: +62 (21) 581 8000, 581 9000
Fax: +62 (21) 581 6999
 
Home  |  About Us  |  Products  |  Download  |  Support  |  Contact Us
 
   Back to top