Pin type, non-invasive and hygrometer with data storage in one meter.
The Protimeter Moisture Measurement System (MMS) Plus is a complete moisture
measurement device for use in many different building related industries. The
MMS combines pin type and non-invasive modes of measurement
together with a thermo-hygrometer in one state-of-the-art instrument.
The MMS Plus can be used systematically to
The MMS Plus incorporates grains per pound calculation; important when
monitoring the drying out of buildings. The MMS Plus is also standard with data
download software and a cable for capturing and downloading up to 1000
results to a PC.
(i) Identify the presence of moisture on and below surfaces and beneath
coverings like ceramic tiles,
(ii) Measure the relative humidity, dew point and temperature
(iii) Confirm the presence - or otherwise - of condensation on surfaces.
(iv) Data log up to 999 results for upload to PC.(see accessories)
The instrument is compact and simple to use, having a large liquid crystal
display and a cluster of just four buttons for selecting the operational modes.
It is supplied in a nylon carry case with zipper together with the necessary
accessories for a complete moisture survey.
When used as a moisture meter, the MMS Plus has two operational modes known
as Search and Measure. By selecting Search mode and holding
the instrument against building materials such as walls, the user obtains a
qualitative indication of the moisture level beneath the surface or under a
floor covering. By selecting Measure mode and using the standard pin or
5” deep wall probes to gather further information at the surface and up to
5” in depth below the surface.
The MMS can be used as a hygrometer to measure relative humidity, ambient
temperature and dew point. In this way the moisture condition of domestic and
commercial environments can be assessed and compared.
The Hygrostick® sensor that is supplied with the instrument can also
be embedded in solid floors and walls to obtain a material’s equilibrium
relative humidity (ERH) value. This technique has been widely adopted by the
flooring industry (ASTM Standard F-2170-02) to establish if concret floors have
dried sufficiently prior to laying a floor covering.
For assessing the risk - or confirming the presence - of condensation on
surfaces the MMS is used in Condensation mode. When the Surface Temperature
Sensor is connected and held against a surface, the MMS displays the difference
between the surface’s temperature and the dew point together with text
messages that confirm whether or not condensation is occurring.
Power : 2 x AA
Pin Mode Range : 6-100 WME/Relative
Search Mode : 0-1000 Relative
Range : 30 - 100 %rh
Range : 32 - 122 deg F
Surface Temperature Sensor : -4 to 122 deg F
Deep Wall Probes
Hygrometer Probe Extension Lead
Technical Data MMS & MMS Plus